![]() For standard analog signals, a TV accepts either a PAL (Europe) or NTSC (North America) signal. Make sure that the signal format of the TV matches the signal output of the card (for on-board TV-output, this setting canīe changed in the BIOS). If you are using a coaxial or S-video connector, set the desktop screen resolution to 800 × 600 (or less).Īdjust the aspect ratio to scale the image to the screen you are using. ![]() Second monitor without using special video signal processing (not covered in this document). Step 1: Click the lower-right corner of the screen to open Action Center, and then click the Connect button to Open the Connect app. If your TV does not have this option, you cannot use it as a Input 1, HDMI 1, or S-video or similar options might be available, depending on your TV. On the TV remote control, press the Source or Input button. First off you need to have hardware that can support miracast, your pc has to support it. ![]() Make sure your TV input source matches the video source that you are using. If your output does not automatically adjust, go to Control Panel > Display > Adjust Resolution > and select TV in the Display drop-down menu. Power on your computer or laptop to connect to the TV. If the computer cannot detect the TV, set the TV as the primary monitor device, and then restart the computer. Power on the TV and select HDMI as the input source. Make sure your TV supports sound with your connection type, or use a separate audio cable connection. Do not connect two cables to the same TV or monitor unless it supports picture-in-picture. Use only one video source per monitor device. Turn on the TV before turning on the computer.
0 Comments
Leave a Reply. |